e.
Install the new mechanism in the housing and
secure with the previously removed phillips screws.
f.
Replace the lens and trim ring and secure
with the previously removed screws.
F.
REPLACEMENT PARTS.
Description
Part No.
Lens, Blue, Fluted
8575068
Lens, Red, Fluted
8575068-01
Lens, Amber, Fluted
8575068-02
LED Mechanism Assy., Amber
8654189A
LED Mechanism Assy., Blue
8654189B
LED Mechanism Assy., Red
8654189R
SAFETY MESSAGE TO OPERATORS
WARNING
Peoples’ lives depend on your safe use of our
products.
Listed below are some important safety
instructions and precautions you should
follow:
•
Although your warning system is operat-
ing properly, it may not be completely
effective. People may not see or heed
your warning signal. You must recognize
this fact and continue driving cautiously.
•
Also, situations may occur which ob-
struct your warning signal when natural
or man-made objects are between your
vehicle and others, such as: raising your
hood or trunk lid. If these situations
occur, be especially careful.
•
At the start of your shift, you should
ensure that the light is securely attached
and operating properly.
Failure to follow these safety precautions may
result in property damage, serious injury, or death to
you, to passengers, or to others.
RETAIN AND REFER TO THIS MESSAGE
-4-
Figure 4.
290A5109
HALOGEN REFLECTOR
HEX NUTS (2)
GROMMET
LENS
FLUTED
SCREWS (2)
GASKET
SCREWS (3)
SCREWS (4)
SCREWS (4)
BRACKET
PLASTIC
HOUSING
MOUNTING
BRACKET
