![background image](http://html1.mh-extra.com/html/federal-signal-corporation/fireray-utility-light/fireray-utility-light_installation-and-maintenance-instructions-manual_3882164007.webp)
7
Installallation and Maintenance Instructions
Federal Signal
www.fedsig.com
Installing the FireRay
NOTE:
For maximum coverage and effectiveness, mount the
light assembly in a horizontal orientation (see Figure 1 ).
Before proceeding with installation, determine the approximate
location of the light assembly and plan all cable/wire routing.
To install the FireRay:
1.
Position the light assembly on the desired mounting surface.
Ensure that the unit is level side to side.
2.
Using the dimensions provided in Figure 2, scribe the two
mounting hole locations and a wiring routing hole location
on the mounting surface.
Figure 1 Mounting holes