![background image](http://html1.mh-extra.com/html/federal-signal-corporation/fireray-utility-light/fireray-utility-light_installation-and-maintenance-instructions-manual_3882164006.webp)
6
FireRay
®
Utility Light
Federal Signal
www.fedsig.com
Installing the FireRay
Overview of the FireRay Utility Light
The Federal Signal utility light heads is a self-contained, high
intensity, LED light designed for mounting to the exterior of a
vehicle. All models are available in a variety of colors and have
an internal flasher Model FireRay are designed for operation on
12 Vdc.
Unpacking the Product
After unpacking the light, inspect it for damage that may
have occurred in transit. If it has been damaged, file a claim
immediately with the carrier, stating the extent of damage.
Carefully check all envelopes, shipping labels, and tags before
removing or destroying them. If installing a permanent mounted
beacon, ensure that the parts listed in Table 2 are included in
the package.
Table 1 Kit contents
Qty Description
Part No.
2
#8 x 1-inch Stainless Steel Screw
7011242-16
2
Plastic Screw Grommet
7065073
Installing the FireRay
INSTALL IN RECOMMENDED AREAS: When installing equipment
inside airbag equipped vehicles, the installer MUST ensure that
the equipment is installed ONLY in areas recommended by the
vehicle manufacturer.
Failure to observe this warning reduces the effectiveness of the
airbag, damage the airbag, or potentially damage or dislodge the
equipment, causing serious injury or death to you or others.
AIRBAG DEPLOYMENT: Do not install equipment or route wiring
in the deployment path of an airbag. Failure to observe this
warning will reduce the effectiveness of the airbag or potentially
dislodge the equipment, causing serious injury or death.