9
Figure 8
Figure 9
3.3) INSTALLING THE LIGHTBAR ON THE VEHICLE ROOF
With the help of another person, position the light bar on the supporting bases now fixed
on to the vehicle roof, adjusting if necessary the distance between the supporting brackets.
Tighten the nuts of the hook with a torque of 6Nm. Make sure that the mounting
is tight and does not move in the groove’
Fix the supporting feet to the bases, inserting the locking rings ("H" Figure 1), flat washers
and grower washers ("I" and "J" in Figure 1) into the two cavities on the bases ("G" in Figure 1)
and screw down with the hexagonal M6x15 screws ("K" in Figure 1). See Figure 10.
Ensure that the lightbar has been correctly installed. Check the installation periodically.
Figure 10
