background image

16 

 

 

Batteries and Charging 

 

Batteries and Charging 

Your  power  chair  uses  one  long-lasting Lithium-Ion  battery.  This battery  is  sealed  and maintenance- 
free. Since it is 

sealed, there is no need to check the electrolyte (fluid) level. Lithium-Ion batteries are 

designed  to  handle  a  longer  and  deeper  discharge.  Though  they  are  similar  in  appearance  to 
automotive batteries, they are not interchangeable. Automotive batteries are not designed to handle a 
long, deep discharge, and also are unsafe for use in power chairs. 

 

MANDATORY!  Battery  posts,  terminals,  and  related  accessories  may  contain 
lead  and  lead  compounds.  Wear  goggles  and  gloves  when  handling  batteries 
and wash hands after handling. 

 

WARNING! Contact your authorized provider if you have any questions regarding 
the battery in your power chair. 

 

Charging the Battery 

The  battery  charger  is  essential  in  providing  long  life  for  your  power  chair  battery.  It  is  designed  to 
optimize  your  power  chair’s  performance  by  charging  the  battery  safely,  quickly,  and  easily.  The 
battery charger is only functional when the charger power cord is plugged into an electrical outlet. 

 

PROHIBITED!  Removal  of  grounding  prong  can  create  electrical  hazard.  If 
necessary,  properly  install  an  approved  3-pronged  adapter  to  an  electrical  outlet 
having 2-pronged plug access. 

 

PROHIBITED!  Never  use  an  extension  cord  to  plug  in  your  battery  charger.  Plug 
the charger directly into a properly wired standard electrical outlet. 

 

PROHIBITED!  Do  not  allow  unsupervised  children  to  play  near  the  power  chair 
while  the  battery  is  charging.  FeatherChair  recommends  that  you  do  not  charge 
the battery while the power chair is occupied. 

 

MANDATORY!  Read  the  battery  charging  instructions  in  this  manual  and  in  the 
manual supplied with the battery charger before charging the battery. 

 

WARNING!  Explosive  gases  may  be  generated  while  charging  the  battery.  Keep 
the power chair and battery charger away from sources 

of ignition such as flames 

or sparks and provide adequate ventilation when charging the battery. 

 

WARNING!  You  must  recharge  your  power  chair’s  battery  with  the  supplied  off- 
board charger. Do not use an automotive-type battery charger. 

 

WARNING! Inspect the battery charger, wiring, and connectors for damage before 
each use. Contact your authorized provider if damage is found. 

 

WARNING! Do not attempt to open the battery charger case. If the battery charger 
does not appear to be working correctly, contact your authorized provider. 

 

WARNING!  Be  aware  that  the  battery  charger  case  may  become  hot  during 
charging. Avoid skin contact and do not place on surfaces that may be affected by 
the heat. 

Summary of Contents for Feather Power Chair





























Reviews: