background image

20 

 

 

WARNING! Corrosive chemicals contained in batteries. Use only Lithium-Ion batteries to 
reduce the risk of leakage or explosive conditions. 

 

Why does my new battery seem weak? 

Like nickel-cadmium batteries, Lithium-

Ion batteries have a “memory” effect. Lithium-Ion batteries are 

specifically  designed  to  provide  power,  drain  down  their  charge,  and  then  accept  a  relatively  quick 
recharge. If the batteries are continually recharged after only being partially discharged, they lose their 
ability to hold a full charge. 

We work closely with our battery manufacturer to provide a battery that best suits your power chair’s 
specific demands. Fresh batteries arrive regularly at FeatherChair and are promptly shipped with a full 
charge.  During  shipping,  the  battery  encounters  temperature  extremes  that  may  influence  initial 
performance. Heat robs the charge from the battery, and cold slows the power available and extends 
the time needed to recharge the battery (just as with a car battery). 

It might  take a few days for the temperature of  the battery to stabilize and adjust  to its new ambient 
temperature. More importantly, it will take a few “charging cycles” (a full drain—then a full recharge) to 
establish the critical chemical balance that is essential to the battery’s peak performance and long life. 
It will be well worth it to take the time to break in your battery properly. 

How can I ensure maximum battery life? 

A  fully  charged  battery  will  provide  reliable  performance  and  extended  battery  life.  Keep  your  power 
chair’s  battery  fully  charged  whenever  possible.  Batteries  that  are  infrequently  charged,  repeatedly 
charged after only a partial discharge, or stored without a full charge may be permanently damaged, 
causing unreliable power chair operation and limited battery life. 

NOTE: The useful life of a battery is quite often a reflection of the care it receives. 

 

How should I store my power chair and its battery? 

If  you  do not  use  your  power  chair  regularly,  we  recommend  maintaining  battery  vitality  by  charging 
the battery at least once per week. 

If you do not plan on using your power chair for an extended period, fully charge the battery prior to 
storage. Flip the battery switch to the off or “0” position, disconnect the battery, and store the  power 
chair in a warm, dry environment. Avoid temperature extremes, such as freezing and excessively hot 
conditions, and never attempt to charge a frozen battery. A cold or frozen battery should be warmed 
for several days prior to recharging. 

What about public transportation? 

The FeatherChair-supplied Lithium-Ion batteries are designed for application in power chairs and other 
mobility  vehicles.  Transport  of  the  item  on  commercial  aircraft  is  subject  to  federal  regulations  and 
airline policy. We suggest you contact the carrier’s ticket counter in advance to determine that carrier’s 
specific requirements, and to ensure your power chair and its Lithium-Ion battery are permitted. 

What about shipping? 

If  you  wish  to use  a  freight  company  to  ship  your  power  chair  to  your  final  destination,  repack  your 
power chair in the original shipping container if possible and ship the battery in a separate box. 

Summary of Contents for Feather Power Chair





























Reviews: