9
PROHIBITED! Do not remove the anti-tip wheels or modify your power chair in any way that is
not authorized by FeatherChair.
not disengage the drive motors when the power chair is on an incline or decline, as
the unit could roll on its own! Only engage the freewheel mode when on a level
surface.
WARNING! It is important to remember that when your power chair is in freewheel
mode, the braking system is disengaged.
WARNING! Do not disengage the drive motors while the power chair is occupied.
NOTE: FeatherChair strongly recommends you do not charge your battery while in freewheel
mode.
NOTE: You must turn off the power before disabling the drive systems; otherwise, you may get
an error code on the controller. To clear this code, turn off the controller and place the power
chair in drive mode. Then turn on the controller. The error message should be cleared. If not,
contact an authorized provider.
To engage or disengage the drive motors:
1.
Locate the lever on each motor.
See
figure 3.
2.
Rotate the manual freewheel levers outward to disengage the drive motors (freewheel mode).
See
figure 3.
3.
Rotate the manual freewheel levers inward to engage the drive motors (drive mode).
See
figure 3.
WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your power chair. They are attached
to the frame at the rear of the chair.
See figures 2 and 3.
Figure 3. Freewheel Levers