Document Number:
MAN
– FDPMAID
Rev:
C
Revision Date:
08/06/2012
Page 5 of 18
©
2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Additional Information
The FDPMAID can be ordered as two different part numbers, depending on the desired
orientation of the display. To order the display with the control buttons on the right-side of
the unit, order the FDPMAID-R (shown above). To order with the buttons on the left-side,
order the FDPMAID-L. NOTE: Button locations and viewing display vary slightly between
FDPMAID-L & FDPMAID-R models.
* The Detached Electronics Box ("DEB") allows the LCD monitor to be panel mounted
anywhere in the cockpit. The DEB contains essential graphics circuitry critical to the
operation of the FDPMAID. The cabling between the DEB and the LCD contains two
break plus and should not be cut nor extended. There is no degradation of image quality
or input sources in this configuration.
Specifications
Display Type
5.0” TFT Color LCD
Screen Resolution
640x480
Brightness
600 cd/m²
LCD Dimensions
5.175”(W) x 4.750”(H) x 0.660”(D)
DEB Dimensions
5.7”(W) x 1.14”(H) x 5.05”(D)
Power
28VDC @ .3 Amps
Video Inputs Supported
Analog RGB, Composite Video
Video Types Supported
VGA, NTSC/PAL
Screen Control
On Screen Display Menu
DO-160E testing
In Progress
Weight
Display: TBD
DEB: .72 lb
Cable: .82 lb
Installation Instructions
All cockpit accessory equipment, such as the FDPMAID, should be installed on a non-
essential bus and have a dedicated circuit breaker. It is a requirement that a switch be
installed so that the pilot can de-energize the system should it become necessary.
