Document Number:
MAN
– FDPMAID
Rev:
C
Revision Date:
08/06/2012
Page 12 of 18
©
2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
NOTE:
On earlier versions of the Detached Electronics Box (D.E.B.) the J2 connector was
a DB37; current versions now use a DB44 connector. If you are replacing an existing DB37
version D.E.B with the current DB44 version then, you will need Data/LVDS DB44 to DB37
Adapter Cable Assembly part number 620-00002-4437. Adapter Cable will be supplied free
of charge from Flight Display Systems upon request.
The following wire diagram of the supplied 620-00002-09 cable assembly is provided should
it be necessary to de-pin a connector to pass through an opening.
NOTE:
Some harness assemblies do not contain all wires shown.
