FDS FDPMAID Series, Installation And Operation Manual

Page: 14 / 18

Document Number:
MAN
– FDPMAID
Rev:
C
Revision Date:
08/06/2012
Page 14 of 18
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Operation Instructions
When 28VDC power is applied, the FD90AID will turn on and search for video input on the
last known source. If no video input is found, the display will go into standby mode. Pilots
will be able to change the video output on the FD90AID using the Select button on the
side of the monitor.
Button Controls
Located on the side of the FDPMAID (right-side on the FDPMAID-R; left-side on the
FDPMAID-L), are the following buttons, from edge to hinge. NOTE: Button locations vary
slightly between FDPMAID-L and FDPMAID-R models.
BUTTON DESCRIPTION
MENU Opens the menu, and escapes out of menus.
(UP)
Increases selected option’s value, and enters menu
pages.
(DOWN)
Decreases selected option’s value. Outside of the menu,
this automatically sets optimal position, brightness, and
color settings for the current source.
SEL Scroll through video sources: Composite, S-Video, and
VGA. In the menu, selects between options and menu
pages.
PWR Turns the unit on or off.