LT4935 (1:01/08)
7
ENIGMA II SLIMLINE SLIDE
Users Instructions
SECTION THREE
Fuel Bed Layout
It is important that all the fuel bed and moulded shapes are positioned as shown in these
instructions.
PEBBLE FUEL BED
Some soot deposits will form on the pebbles, this is perfectly normal and adds to the
realism of the appliance. Some heat discolouration of the firebox sides is also perfectly
normal and does not detract from the operation of the fire.
USE ONLY THE PEBBLES PROVIDED - NO ADDITIONAL PEBBLES MUST ADDED
.
The Loose pebble set consists of: -
•
Rear Matrix
•
Front Matrix
•
Loose Pebbles – 14 Large, 3 Small. Grey and beige colour quantities may vary.
•
Position the rear matrix as shown
and make sure that it is pushed
back as far as possible.
•
Position and ensure the front
matrix is located behind the burner
fascia as shown.
•
Make sure that the burner slot is
clear as shown in the photo.
Summary of Contents for ENIGMA II SLIMLINE SLIDE
Page 21: ...LT4935 1 01 08 21...
