R E A D B E F O R E A S S E M B L Y
Make sure that all parts and screws are included by comparing the parts list with the contents of the box.
Also check that everything is undamaged before assembling the product.
If the barbecue is damaged during transport, do not assemble the barbecue before contacting your
dealer or [email protected].
Transport damage to parts, varnish or enamel must be reported to the dealer or FCC BBQ before
mounting and using the barbecue. If damage is reported after, there is a possibility that damage may have
occurred during assembly. This will not be considered as transport damage.
Please note that some parts may be located in the Styrofoam to protect the part during transport.
If parts are missing, first check the packaging carefully. Remove all remnants of packaging material
and any plastic foil from the barbecue before using the barbecue.
●
FOLLOW THE ORDER IN THIS MANUAL TO AVOID INCORRECT ASSEMBLY.
PARTS OF THE ASSEMBLY WILL REQUIRE HEAVY LIFTING WHICH SHOULD
BE PERFORMED BY TWO PEOPLE TOGETHER, TO AVOID PERSONAL INJURY
AND DAMAGE TO THE BARBECUE. SOME METAL PARTS MAY BE SHARP,
WEAR PROTECTIVE GLOVES.
●
POWER TOOLS SHOULD NOT BE USED TO ASSEMBLE THE BARBECUE.
TOOLS WITH TOO MUCH FORCE CAN DAMAGE THE SURFACE TREATMENT
ON SCREWS, DAMAGE ENAMELLED/LACQUERED PARTS
OF THE BARBECUE, AS WELL AS LOOSEN PRE-ASSEMBLED NUTS.
●
IF THE PRODUCT'S VARNISH OR ENAMEL IS DAMAGED DURING ASSEMBLY,
WE RECOMMEND THAT THE DAMAGE BE TREATED IMMEDIATELY TO
AVOID LATER RUST DAMAGE. SUITABLE HEAT-RESISTANT VARNISH CAN BE
ORDERED FROM [email protected].
!
FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS
PERSON INJURY OR DAMAGE TO YOUR BARBECUE.
THE BARBECUE SHOULD BE ASSEMBLED ON A LEVEL SURFACE.
7
