Lighting Instructions
●
IF THE BURNER DOES NOT IGNITE, TURN THE SWITCHES TO THE OFF
POSITION (CLOSE THE GAS SUPPLY) AND WAIT 5 MINUTES BEFORE TRYING
TO IGNITE AGAIN.
●
IF THE GRILL STILL DOES NOT LIGHT WITH NORMAL OR MANUAL METHOD,
READ THE TROUBLESHOOTING TABLE OR CONTACT YOUR DEALER.
LIGHTING INSTRUCTIONS
1.
Open the lid. The lid must always be open when the grill is lit.
2.
Check that all controls are in the "OFF" position. Open valve control on gas
container.
3.
Push and turn the control knob slowly to the left to
”MAX” position and repeatedly press the ignition
button if necessary (about 4-5 times).
Make sure that the burner lights up before repeating the
same operation with the next burner.
TIP: Preheat the grill for about 10-15 minutes at maximum temperature. After
preheating, turn all burners to the ”LO” position for the best possible cooking result.
If the burners do not light up after 5 seconds, put all the switches in the “OFF” position
and close the regulator on the gas cylinder.
Wait for 5 minutes. Repeat the procedure above.
MANUAL LIGHTING
If the piezo ignitor of the appliance does not work or you like to light the appliance
manually using a long match or a fireplace lighter:
Do not lean over the grill while lighting!
1.
Make sure all switches are in the ”OFF” position.
2.
Open the lid. The lid must always be open when the grill is lit.
3.
Open the gas from the gas container with the regulator.
4.
Light a long match / fire place lighter and put it in the lighting hole on the left or
right side of the grill grate.
5.
Push one control knob and turn the switch to the left.
Make sure the burner ignites and stays lit.
When the burner is lit, the next burner can be lit in the same way.
!
Ignition button
19
fccbbq.com
