FCA US DODGE CHARGER 2021 Owner'S Manual Download Page 255

Page: 255 / 356

IN CASE OF EMERGENCY

253

Even if the SOS Call system is fully functional,

factors beyond FCA US LLC’s control may

prevent or stop the SOS Call system operation.

These include, but are not limited to, the

following factors:



The ignition is in the OFF position.



The vehicle’s electrical systems are not

intact.



The SOS Call system software and/or

hardware are damaged during a crash.



The vehicle battery loses power or becomes

disconnected during a vehicle crash.



LTE (voice/data) or 4G (data) network and/or

Global Positioning Satellite signals are

unavailable or obstructed.



Equipment malfunction at the SOS operator

facility.



Operator error by the SOS operator.



LTE (voice/data) or 4G (data) network

congestion.



Weather.



Buildings, structures, geographic terrain, or

tunnels.

NOTE:



Your vehicle may be transmitting data as

authorized by the subscriber.



Never place anything on or near the vehicle’s

LTE (voice/data) or 4G (data) and GPS

antennas. You could prevent LTE (voice/

data) or 4G (data) and GPS signal reception,

which can prevent your vehicle from placing

an emergency call. An operable LTE (voice/

data) or 4G (data) network connection and a

GPS signal is required for the SOS Call

system to function properly.

WARNING!



Ignoring the Rearview Mirror light could

mean you will not have SOS Call services.

If the Rearview Mirror light is illuminated,

have an authorized dealer service the

SOS Call system immediately.



The Occupant Restraint Control module

turns on the air bag Warning Light on the

instrument panel if a malfunction in any

part of the system is detected. If the Air Bag

Warning Light is illuminated, have an

authorized dealer service the Occupant

Restraint Control system immediately.

WARNING!

ALWAYS obey traffic laws and pay attention to

the road. ALWAYS drive safely with your hands

on the steering wheel. You have full

responsibility and assume all risks related to

the use of the Uconnect and SiriusXM

Guardian™ features and applications in this

vehicle. Only use Uconnect features and

SiriusXM Guardian™ services when it is safe

to do so. Failure to do so may result in an

accident involving serious injury or death.

21_LD_OM_EN_USC_t.book Page 253

Summary of Contents for DODGE CHARGER 2021





































































































































































































































































































































































Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

Related manuals for DODGE CHARGER 2021

Brands by name

Popular brands

FCA US DODGE CHARGER 2021, Owner'S Manual

Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

Related manuals for DODGE CHARGER 2021

Brands by name

Popular brands