FCA US DODGE CHARGER 2021 Owner'S Manual Download Page 38

Page: 38 / 356

GETTING TO KNOW YOUR VEHICLE

NOTE:



Once a heat setting is selected, heat will be

felt within two to five minutes.



The engine must be running for the heated

seats to operate.

RONT

ENTILATED

EATS

— I

QUIPPED

The ventilated seats are equipped with fans

that can be controlled through the climate and

control screen in the Uconnect system. The fans

operate at two speeds, HI and LO.



Press the ventilated seat button once to

choose HI.



Press the ventilated seat button a second

time to choose LO.



Press the ventilated seat button a third

time to turn the ventilated seat off.

NOTE:

The engine must be running for the ventilated

seats to operate.

For information on use with the Remote Start

system, see

page 18.

EAD

ESTRAINTS

Head restraints are designed to reduce the risk

of injury by restricting head movement in the

event of a rear impact. Head restraints should

be adjusted so that the top of the head restraint

is located above the top of your ear.

NOTE:

Do not reverse the head restraints (making the

rear of the head restraint face forward) in an

attempt to gain additional clearance to the back

of your head.

Reactive Head Restraints — Front Seats

The front driver and passenger seats are

equipped with Reactive Head Restraints (RHR).

In the event of a rear impact, the RHR will

automatically extend forward minimizing the

gap between the back of the occupant’s head

and the RHR.
The RHR will automatically return to their

normal position following a rear impact. If the

RHR do not return to their normal position, see

an authorized dealer immediately.
To raise the head restraint, pull upward on the

head restraint. To lower the head restraint,

push the adjustment button located at the base

of the head restraint and push downward on the

head restraint.

WARNING!



All occupants, including the driver, should

not operate a vehicle or sit in a vehicle’s

seat until the head restraints are placed in

their proper positions in order to minimize

the risk of neck injury in the event of a

crash.



Head restraints should never be adjusted

while the vehicle is in motion. Driving a

vehicle with the head restraints improperly

adjusted or removed could cause serious

injury or death in the event of a collision.

21_LD_OM_EN_USC_t.book Page 36

Summary of Contents for DODGE CHARGER 2021





































































































































































































































































































































































Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

Related manuals for DODGE CHARGER 2021

Brands by name

Popular brands

FCA US DODGE CHARGER 2021, Owner'S Manual

Search results

Summary of Contents for DODGE CHARGER 2021

Reviews:

Related manuals for DODGE CHARGER 2021

Brands by name

Popular brands