CAP-835
14
3 Installation and
commissioning
3.1 Safety instructions for the
installation and
commissioning
Electrical system
DANGER!
Danger to life from electric
power!
Contact with live parts may prove
fatal. When switched on, electric
components can be subject to
uncontrolled movements and may
cause grave injury or death.
-
Switch off the power supply
before starting work and make
sure that it cannot be switched
on again. Follow lockout/ tagout
procedure.
Improper initial commissioning
WARNING!
Danger of injury due to improper
initial commissioning!
Improper initial commissioning can
result in serious injury and
significant damage to property.
-
Before the initial commissioning,
ensure that all installation work
has been carried out and
completed in accordance with
the information and instructions
in this manual, National Electric
Code, and local state and
federal regulations.
Securing to prevent restart
WARNING!
Danger to life from an
unauthorized restart!
In the event of an unauthorized
restart of the power supply during
installation, there is a danger of
serious injuries or death for persons
in the danger zone.
-
Switch off all power supplies
before starting work and make
sure they cannot be switched on
again. Follow lockout/ tagout
procedure.
Improper installation and commissioning
WARNING!
Risk of injury due to improper
installation or commissioning!
Improperly performed installation
and commissioning may lead to
serious injury and significant
material damage.
-
Provide for sufficient mounting
clearance before starting to
work.
-
Use caution when handling
exposed components with sharp
edges.
-
Keep the assembly area tidy and
clean! Loose components and
tools lying around or on top of
each other may lead to
accidents.
-
Mount all components properly.
Tighten all screws to the
prescribed torque.
-
Secure components to prevent
them from falling down or tipping
over.
-
Observe the following prior to
commissioning:
-
make sure that all installation
work has been performed
and completed following the
instructions and information
provided in this manual.
-
make sure that no persons
are still in the danger zone of
the machine.
