16
VAIE 7M00
EN
4.2.11 CONNECTION OF POWER SUPPLIES
CHARGER CIRCUIT AND TERMINAL STRIP
1> Check that the main thermal-magnetic circuit
breaker is switched OFF.
2> Connect the power cable coming from the
thermal-magnetic circuit breaker and the
earth cable to the contacts on the terminal
strip (
A
) - see fi gure.
3> Connect the external terminals (
B
) of the
batteries, observing the correct polarities.
4> Switch the thermal-magnetic circuit
breaker ON.
5> Make a jumper between the inside terminals
of the batteries using the cable (
C
) included
in the supply.
6> Close the front door, tightening the screws
fi rmly.
From now on the VAIE is working.
NOTE:
If the front door is opened, the amplifi ers are deactivated automatically, and can be re-activated by specialised
personnel only by using a specifi c menu item.
!
N.B.
Check that the main thermal-magnetic circuit
breaker is switched OFF.
If it is not, switch it OFF before carrying out any
other activities in the cabinet as there is a danger
of electric shocks.
!
N.B.
These devices have been designed to be
connected to an earthed power supply. Make sure
that the equipment is always connected to earth
in accordance with legal regulations.
It is essential to follow the correct sequence for
powering up the equipment, failing which it could
be damaged.
Summary of Contents for VAIE 7M00 Series
Page 2: ...2 ...
Page 6: ...6 VAIE 7M00 IT 2 3 CONFIGURAZIONE TIPO ...
Page 50: ...2 ...
