DIGITAL MERCHANDISER
56X/77X MODELS
12
6.9 Saving Changes and Exiting Service Mode
As changes are completed throughout the screens in the Service Mode, using the blue arrow found in some of the screens
will allow you to return to the previous screens and save the information that was updated. Once all required changes
are completed, you can exit the Service Mode by pressing the “Exit Service Mode” button at the bottom of the screen, as
shown in
Figure 6.7
found in Section 6.5 of this manual.
7. MULTI-BARREL (TWO-, THREE-, OR FOUR-BARREL)
7.1 Unlocking a Two-, Three-, or Four-Barrel Merchandiser
To unlock the merchandiser display, touch each of the four corners of the video portion of the screen in clockwise order
starting with the top left corner. These touches must be made within 1 second of each other or the “unlocking” will not
activate. Content management controls will appear upon a successful “unlock” of the screen.
Figure 7.1
illustrates the
unlocking procedure on a three-barrel merchandiser (the procedure is the same for a two-barrel merchandiser).
Figure
7.2
illustrates the process on a four- barrel merchandiser.
Figure 7.1