FAZUA Evation, Original Instructions Manual

Page: 33 / 84

31 Chapter "Cleaning and maintenance"
7 CLEANING AND MAINTENANCE
CAUTION
Risk of injury!
If the drive system is set in motion while you are handling it, you
may jam your fingers or otherwise injure yourself.
► Remove the drivepack from the eBike when cleaning the
eBike or the drive system components.
NOTICE
Risk of damage!
Improper cleaning may damage the drive system or individual
components.
► Never immerse the drive system components in water or
other liquids for cleaning.
► Do not use aggressive cleaning agents for cleaning.
►
Do not use sharp, angular or metallic cleaning objects when
cleaning.
►
Never clean the drive system components with a hard water
jet or a high-pressure cleaner.
► Always keep all components of the eBike and the drive system in a
clean condition.
► Clean the components gently with a cloth or soft brush.
► Wipe all surfaces and components dry after cleaning.
► Pay particular attention to the contacts and interfaces between
battery and drivepack and between drivepack and bottom bracket:
The interfaces must not be soiled or contaminated and must be
completely dried before inserting the components to avoid damage.
► Clean the radiator of the drivepack regularly.
Do not clean the radiator only when it is visible or heavily soiled!
► Keep the drainage opening on
the colling body clean or clear
to ensure that splash water
and/or condensate can drain
easily from the drivepack.
The drainage opening is
located on the radiator directly
above the USB port or the
corresponding cover (see
illustration on the right).
► Lubricate the locker for
locking the drivepack to the
frame approximately every 2 - 3 months or at the latest as soon as it is
no longer convenient to operate.
► For more information on cleaning and maintaining your drive system,
contact a Fazua servicepartner or visit the Fazua service platform
(www.fazua.com/service).