background image

English - 3

Foreword

Foreword

This description is intended exclusively for trained specialists in controlling and automation technology 

who are familiar with the applicable national standards. For installation and commissioning of the 

components it is absolutely necessary to observe the following notes and explanations. The qualified 

personnel must ensure that the application or use of the described products meets all safety 

requirements, including all applicable laws, regulations, provisions and standards.

Disclaimer

This documentation has been carefully prepared. However, the products described are subject to 

continuous further development. Therefore, the documentation is not always completely checked for 

compliance with the described performance data, standards or other features. If it contains technical or 

editorial errors, we reserve the right to make changes at any time and without notice. The information, 

illustrations and descriptions in this documentation do not constitute grounds for claims for changes to 

products already supplied.

Copyright

© faytech AG.

Passing on and reproduction of this document, use and communication of its contents are prohibited 

unless expressly permitted. All rights reserved in case of patent, utility model or design patent 

registration.

State of delivery

All components are delivered in specific hardware and software configurations depending on the 

application requirements. Changes to the hardware or software configuration, which go beyond the 

documented possibilities are not permitted and result in the exclusion of liability of faytech AG.

Notes on documentation

Summary of Contents for N3350





















Reviews: