manualshive.com logo in svg

Fayat Bomag BP 25/50, Operating Instruction, Maintenance Instruction

The Fayat Bomag BP 25/50 is a heavy-duty construction equipment perfectly designed for efficient and reliable performance. With our user-friendly manual, you can easily access comprehensive Operating and Maintenance Instructions. Download it for free from our website manualshive.com and keep your equipment running smoothly.

Share
Download
background image

8.10.3.2 

Measures before restarting

DANGER!
Danger to life caused by explosive gas-air mixes!

–

Do not allow gasoline to come into contact with hot

components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and other

sources of ignition.

–

Do not spill any gasoline.

1.

Check the oil levels.

2.

If the fuel has been drained off before shutting down, you

must now fill in fuel.

3.

Check hoses and lines for cracks and leaks.

4.

Clean the machine thoroughly.

5.

Start the engine and run it 15 to 30 minutes with idle speed.

Maintenance – As required

 

BP 25/50

 

92

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for Bomag BP 25/50





































































































Reviews:

No comments

Related manuals for Bomag BP 25/50

Brands by name

Popular brands

Load more brands