Fayat Bomag BP 25/50 Operating Instruction, Maintenance Instruction Download

Page: 80 / 100

8.9.2 Cleaning the fuel screen

DANGER!
Danger to life caused by explosive gas-air mixes!

–

Do not allow gasoline to come into contact with hot

components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and other

sources of ignition.

–

Do not spill any gasoline.

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.5 ‘Park

the machine in secured condition.’ on page 56

Allow the engine to cool down.

Close the fuel valve.

Disassemble filter bowl (1) and O-ring (2).

Fig. 70

Fig. 71

Maintenance – Annually

BP 25/50

Discount-Equipment.com

order

your

parts

Summary of Contents for Bomag BP 25/50





































































































Search results

Summary of Contents for Bomag BP 25/50

Reviews:

Related manuals for Bomag BP 25/50

Brands by name

Popular brands

Fayat Bomag BP 25/50, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for Bomag BP 25/50

Reviews:

Related manuals for Bomag BP 25/50

Brands by name

Popular brands