manualshive.com logo in svg

Fayat Bomag BP 20/50, Operating Instructions Manual

The Fayat Bomag BP 20/50 is a powerful construction equipment designed to streamline your operations. Conveniently access its Operating Instructions Manual, available for free download at manualshive.com. This comprehensive manual provides step-by-step guidance for optimal use and maintenance, ensuring efficient and safe performance of the BP 20/50.

Share
Download
background image

 As required

BOMAG

59

BP 20/50, BP 25/50

As r equi red

6.22 Change the air filter

Caution

!

Do not run the engine without an air filter, 
since this could cause premature wear of the 
engine.

The air filter must be changed after several 
times cleaning, but at the latest after 1 year.

Contaminants or dirt must not enter into the in-
take channel.

Fig. 75 

l

Unscrew wing nut (1) (Fig. 75) and remove the 
housing cover (2).

l

Clean the housing cover from inside.

l

Unscrew wing nut (3)  and take off paper ele-
ment (4) with the foam rubber insert (5).

l

Check the rubber seal (6), replace if neces-
sary.

Caution

!

The rubber seal (6) frequently sticks to the pa-
per element.

l

Soak the new foam rubber insert (5) in clean 
engine oil. Then squeeze out excess oil.

l

Pull the foam rubber element (5) over the new 
paper element (4).

l

Insert the air filter correctly and tighten it with 
the wing nut (3).

Caution

!

If the air filter is not correctly inserted, dust 
and foreign particles can enter into the air in-
take channel.

l

Reassemble the housing cover (2) with the 
wing nut (1).

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for Bomag BP 20/50































































Reviews:

No comments

Related manuals for Bomag BP 20/50

Brands by name

Popular brands

Load more brands