Operation
BOMAG
29
BP 20/50, BP 25/50
Fig. 23
l
Pull the rope by the starter handle quickly and
powerful as far out as possible (Fig. 23).
Caution
!
Do not let the starter handle hit back, but guide
it back.
l
If the engine does not start during the first at-
tempt, repeat the starting process.
Fig. 24
l
As the engine warms up open the lever (Fig.
24) of the choke bit by bit.
Fig. 25
l
Move the throttle lever (Fig. 25) back to idle
speed position.
l
Run the engine warm for approx. 1 to 2 min-
utes in idle speed.
Note
i
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
Caution
!
When the engine is running leave the ignition
switch in position "I".
Fig. 26
l
If the engine stops again after approx. 3 to 5
seconds, close the choke again with the lever
(Fig. 26) and repeat the starting process.
Go
to
Discount-Equipment.com
to
order
your
parts
