44
7 Working with the MLS 508
7.3.3 Relative adjustment of the Cross Slope sensor
Via the relative adjustment the Cross Slope sensor’s actual value can be re-
adjusted. It is of no importance whether this is done in manual or automatic mode.
1) Press and hold the function key F2 in
the standard working menu.
2) With the respective control loop’s
UP/DOWN keys enter the favoured new
actual value for the milling drum’s angle of
slope, considering the sign.
3) When the function key is released, after
3 seconds the set value is taken over as
the slope sensor’s new actual value.
NOTICE
Risk caused by unintended adjustment!
The target value has not changed. In automatic mode the milling
drum may be re-adjusted according to the settings! This may lead
to unintended readjustments.
Therefore:
y
Where required, switch off the automatic mode.
Summary of Contents for Bomag BM 500/15
Page 2: ......
