42
7 Working with the MLS 508
7.3.2 Operating with the Cross Slope sensor
The Cross Slope sensor has been selected for one of the two sides with the help of the
sensor change key (also see “6.6 Sensor selection”). The other side is controlled manually
or by means of a grade sensor.
1) If the automatic light of the side selected
for cross slope operation lights up, switch
this control loop to manual mode by
pressing the corresponding A/M key
(manual = automatic light off).
2) Enter the desired target value for the
milling drum’s slope angle - taking account
of the sign - by using the UP/DOWN keys
of the corresponding control loop.
By briefly and simultaneously
pressing the UP and DOWN keys
0.00 % is set as target value.
If you hold down both keys until
the display jumps from 0.0 % to
“Set”, the current milling drum’s
slope will be adopted as target
value.
Summary of Contents for Bomag BM 500/15
Page 2: ......
