Operation
BOMAG
26
BPR 70/70 D
4.5
Starting the engine
!
Danger
Exhaust gases are highly dangerous!
Always ensure an adequate supply of fresh air
when starting and operating in closed rooms
and trenches!
!
Danger
Danger of accident!
Before starting make sure that there are no
persons in the danger area of engine or ma-
chine and that all safety installations are in
place.
Always hold on to the machine.
Always keep an eye on a running machine.
!
Danger
Loss of hearing!
Wear your personal noise protection means
(ear defenders) before starting operation.
Fig. 18
l
Set the throttle lever (Fig. 18) to position
"MAX".
Fig. 19
l
Turn the ignition key to position "I" (Fig. 19),
the warning buzzer sounds.
l
Then turn the ignition key further to position "II"
to start the engine.
l
As soon as the engine runs, return the ignition
key to position "I". The warning buzzer stops.
Fig. 20
l
After starting take the throttle lever back to po-
sition "MIN" (Fig. 20).
l
Run the engine warm for approx. 1 to 2 min-
utes in idle speed.
i
Note
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
!
Caution
When the engine is running leave the ignition
key in position "I".
Go to
Discount-Equipment.com
to
order your parts
