Safety regulations
BOMAG
15
BPR 70/70 D
l
hoses are mixed up by mistake.
l
the fitting shows corrosion that impairs both
function and strength.
l
fittings are damaged or deformed, whereby
the function and strength of the hose/hose
connection is impaired.
Only genuine BOMAG replacement hydraulic hos-
es ensure that the correct hose type (pressure
range) is used at the right location.
Working on the engine
Drain the engine oil at operating temperature –
danger of scalding!
Wipe off spilled oil, catch running out oil and dis-
pose of environmentally.
Store used filters and other oil contaminated ma-
terials in a separate, specially marked container
and dispose of environmentally.
Working on electric parts of the machine
Before starting to work on electric parts of the ma-
chine disconnect the battery and cover it with insu-
lating material.
Working on the battery
When working on the battery do not smoke, do not
use open fire!
Do not let acid come in contact with hands or
clothes! When injured by acid flush off with clear
water and seek medical advice.
Do not lay any tools on the battery.
For recharging remove the plugs from the battery
to avoid an accumulation of highly explosive gas-
es.
Dispose of old batteries according to regulations.
Working on the fuel system
Avoid open fire, do not smoke, do not spill any fuel.
Catch running out fuel, do not let it seep into the
ground and dispose off environmentally.
Cleaning work
Do not perform cleaning work while the motor is
running.
Do not use gasoline or other easily inflammable
substances for cleaning.
When using a steam cleaner for cleaning do not
subject electrical parts and insulation material to
the direct jet or cover these items beforehand.
Do not guide the water jet directly into air filter and
air intake or exhaust muffler.
After maintenance work
After all maintenance work is completed reinstall
all guards and safety installations.
Repair
Repair work must only be performed by qualified
and authorized persons. Use our repair instruc-
tions for this work.
Exhaust gases are highly dangerous! Always en-
sure an adequate supply of fresh air when starting
in closed rooms!
Mark defective machines by attaching a warning
note to the steering handle.
Welding
Before starting welding work on the machine dis-
connect the battery and cover the fuel tank with in-
sulating material.
Safety stickers on the machine
Keep safety stickers in good condition and legible
and follow their meaning.
Replace damaged and illegible safety stickers.
Go to
Discount-Equipment.com
to
order your parts
