Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction Download Page 26

Page: 26 / 111

3.4.5 Safety regulations and environmental protection regulations for handling

hydraulic oil

WARNING!
Danger of injury caused by escaping pressure

fluid!

–

Always depressurize the hydraulic system

before starting work in the hydraulic system.

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing, goggles).

Should pressure fluid penetrate the skin, imme-

diate medical help is required.

WARNING!
Danger of burning by ignited hydraulic oil!

–

Do not allow hydraulic oil to come into contact

with hot components.

–

Smoking and open fire is prohibited!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

CAUTION!
Health hazard caused by contact with hydraulic

oil!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Do not inhale any oil vapours.

–

Avoid contact.

CAUTION!
Danger of slipping on spilled oil!

–

Immediately bind spilled oil with an oil-binding

agent.

ENVIRONMENT!
Oil is an environmentally hazardous substance!

–

Always keep oil in proper containers.

–

Immediately bind spilled oil with an oil-binding

agent.

–

Dispose of oil and oil filter according to regula-

tions.

Fig. 6

Concerning your safety – Handling fuels and lubricants

BPR 35/60

Go to

Discount-Equipment.com

order your parts

Summary of Contents for BOMAG BPR 35/60
















































































































Search results

Summary of Contents for BOMAG BPR 35/60

Reviews:

Related manuals for BOMAG BPR 35/60

Brands by name

Popular brands

Fayat Group BOMAG BPR 35/60, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for BOMAG BPR 35/60

Reviews:

Related manuals for BOMAG BPR 35/60

Brands by name

Popular brands