Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction Download

Page: 82 / 111

CAUTION!
Danger of injury caused by uncontrolled

machine movement!

–

Always hold on to a running machine.

–

Always keep an eye on a running machine.

Protective equipment:

Working clothes

Hearing protection

Safety shoes

Special tool:

Sirometer

Park the machine on a rubber mat.

Start the engine

Chapter 6.2 ‘Starting the engine’

on page 51

Run the machine at maximum speed for one minute.

Check the base plate’s frequency with a suitable measuring

instrument (e.g. Sirometer).

Nominal value:

Chapter 2 ‘Technical data’ on page 11

Park the machine safely

Chapter 6.4 ‘Parking the machine

in secured condition’ on page 57

If frequency incorrect:

Check the engine speed.

Check the V-belt.

If necessary, contact our customer service.

8.8.6 Replacing the starter rope

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.4

‘Parking the machine in secured condition’ on page 57

Allow the engine to cool down.

Disassembling the recoil starter.

Fig. 87

Maintenance – Annually

BPR 35/60

Discount-Equipment.com

order

your

parts

Summary of Contents for BOMAG BPR 35/60
















































































































Search results

Summary of Contents for BOMAG BPR 35/60

Reviews:

Related manuals for BOMAG BPR 35/60

Brands by name

Popular brands

Fayat Group BOMAG BPR 35/60, Operating Instruction, Maintenance Instruction

Search results

Summary of Contents for BOMAG BPR 35/60

Reviews:

Related manuals for BOMAG BPR 35/60

Brands by name

Popular brands