2
INSTALLATION AND MAINTENANCE MANUAL
523323 PUBLICATION DATE 2 OCT 2006.DOC
2. WARNINGS AND SYMBOLS
TO MINIMIZE THE RISK OF FIRE, INJURY BY ELECTRIC SHOCK OR SERIOUS INJURIES
OF PERSONS OR PROPERTY DAMAGE, PLEASE READ AND FOLLOW THE FOLLOWING
INSTRUCTIONS:
2.1. PERSONAL SAFETY RULES
GENERALLY
•
This English version is the original version.
•
This instruction is not complete without „User’s“, „Programming“, and „Spare parts manual”.
•
Before installation, operation and maintenance of the machine read carefully the complete instructions supplied
with the machine, i.e. this „Installation and maintenance manual“, „User’s manual“, „Programming manual“ and
„Instruction manual for frequency inverter“. Keep the manuals in a handy place.
•
Do not bypass the safety instructions stated in manuals and warnings on the labels. Basic safety instructions
stated in chapters „2. Warnings and symbols“ of the supplied manuals should be printed and located near
the machine for the operator's use. The labels must be readable and permanently located on the machine!
•
Follow all valid local safety instructions and laws !
•
Do not use the machine with its parts damaged, missing parts or opened covers !
•
Do not store any flammable materials near the machine. Storing of chemicals near the machine or operating
dry cleaning machines in bad technical conditions can cause a health damage or the machine parts corrosion.
•
Do not tamper with the machine controls.
•
The washer extractor is intended to be permanently connected to fixed wiring.
•
The machine must be connected to the power, ground, water and ventilation according to the installation manual,
in compliance with the local standards done by qualified technicians with proper authorization. The valid
standards for connecting to the local power network (TT / TN / IT, ...) must be followed. In the standard
execution, the washer may not be suitable for connecting to an IT supply system.
•
If you have a machine with frequency inverter do not change the parameters of the inverter. Doing so can cause
serious injury, fire, machine damage, etc.
•
Instructions and warnings included in this manual do not cover all possible conditions and situations that can
occur at installation, maintenance or operations of the machine. They must be understand in common sense.
Caution and carefulness are factors that can not be achieved by the design of machine. These factors are
conditioned by qualification and competence of personnel who install, operate and maintain the machine.
•
In case of a problem or situations that you can not solve by yourselves, contact your qualified serviceman,
manufacturer or the dealer. Always state the model and serial number of your machine from the completed
last page of the manual.
•
The emergency stop device is omitted on machines design for coin, token, external payment system or similar
operation for use in self-service situation. The owner-installer-user must provide a remote-located emergency
stop device that is connected to each machine.
FOR MAINTENANCE
•
When the main switch is off, the inlet terminals of the switch are still under current!
•
Do not bypass any safety devices or their parts. Any interference to the machine function and design are
prohibited and the manufacturer does not bear any responsibilities in such cases!
•
Before maintenance activities always disconnect the machine power supply!
•
Do not repair or replace any machine parts and do not perform machine service work if it is not recommended
in the maintenance instructions. All other service activities should be provided by qualified service workers.
•
Do not repair or adjust the machine belt drives while in operation. Turn off the main switch!
•
Original or identical parts must be used for replacement in this machine. After servicing replace and secure all
panels in the original way. Take these measures for continued protection against electrical shock, injury, fire
and/or property damage.
•
Once in 3 months, check the earthing and the emergency function.
•
Keep the machine top clean and free of flammable materials. Do not wash or spray the machine by water.
INSTALLATION AND SERVICE CAN BE DONE BY A SERVICE ORGANIZATION WITH PROPER
AUTHORIZATION FROM THE MANUFACTURER.
The machine warranty can be cancelled if the instructions of this manual are not followed.
2.2. SYMBOLS ON THE MACHINE
Danger, read and follow written instructions
Caution, high power voltage, electrical devices
Press push button in case of emergency
