favex profi, Assembly And Usage Instructions

Page: 20 / 60

20
GB
Assembly instructions COSYSTAND PROFI • 01-01-2012
II. Important safety information
CAUTION: Only use outdoors or in well-ventilated rooms.
(The definition of a well-ventilated room is that at least 25% of the surrounding area is open.
The surrounding area is the sum of all wall surfaces.)
Intended use
• The patio heater may only be used for heating purposes.
• The device must be installed according to these instructions.
General safety notes:
• Keep children away from the patio heater during assembly (risk of swallowing
small parts) and during use (risk of burning) as well as when it is in storage.
• The plastic bag from the packaging material can pose a risk of suffocation if it
is put over the head.
• Keep the liquid gas bottle in a well ventilated area above the ground.
• Do not use the patio heater in flats, houses, cellars, office buildings and other
similar spaces.
• The device must be placed on a solid, level surface.
• Keep all liquid gas canisters out of direct sunlight.
• The area of use must have a volume of 20m³ per 1kW of installed nominal
thermal load of the patio heater and it must also be well ventilated (roofed
terrace, beer tents etc).
• When in use, the device must be placed at a safe distance from combustible
materials. The distance between the heat source and the combustible materials
must not be less than 2m in the direction of radiation.
Distance in other directions to combustible materials must not be less than 1m.
• Secure the device against falling over or switch it off in high winds.
• Check that the sealants on the canister valve are in place and undamaged
before every start up. Do not use any additional sealants.
• The patio heater may only be operated using an intermediary pressure regulator
with an acceptable exit pressure (see device rating plate and factory settings).
• Check the sealant properties of all connections immediately after assembly.
Use a foaming agent (e.g. Gas Control Sprayor suds) for this purpose.
• Before moving the patio heater to a different location it must be turned off and
the gas canister must be removed from the canister holder.
• The gas hose must not be bent.
• The ventilation holes on the container sleeve of the canister must not be
covered. It is possible that gas could leak out and collect in the holder which
creates a risk of explosion.
• Never move the device when it is switched on (risk of burning).