manualshive.com logo in svg

Faulhaber MC 3001 B, Technical Manual, Page: 30 / 84

Share
Download
Faulhaber MC 3001 B Technical Manual Download Page 30

1st edition, 12.02.2021

7000.05071, 1st edition, 12.02.2021

7000.05071

Product description

30

Tab. 29: Connector overview of the motherboard 6500.01807

Motor connection (M1)

Tab. 30: Pin assignment of the DC motor connection (M1)

Tab. 31: Electrical data of the DC motor connection (M1)

Designation

Function

A, B, C (controller)

MC 3001 B connection (for pin assignment, see chap. 3.3.1.1, p. 13)

MC (controller)

MC 3001 P connection (for pin assignment, see chap. 3.3.1.2, p. 17)

M1 (motor)

Connection of the motor phases

M3/1 (motor and controller)

Connection of a motor with IE2 incremental encoder

M3/2 (motor and controller)

Connection of a motor with IEH3 incremental encoder

M3/3 (motor and controller)

Connection of a motor with IEH3L incremental encoder

X1 (USB)

USB interface connection

X2 (COM)

CAN/RS232 interface connection

X3 (I/O)

Voltage supply of the controller and motor
Inputs or outputs for external circuits

S1 (DIP switch COM)

Selection of the COM interface:

C: CAN

RS: RS232

S2 (DIP Switch Encoder Term)

Encoder terminal resistance:

Encoder without line driver: S2-1, S2-2 and S2-3 in 

OFF

 position

Encoder with line driver (L version): S2-1, S2-2 and S2-3 in 

ON

 position

Pin

Designation

Meaning

1

Motor +

Connection of motor, positive pole

2

Motor –

Connection of the motor, negative pole

Designation

Value

Motor power supply

0...U

mot

Max. 5 A
100 kHz

Summary of Contents for MC 3001 B





















































































Reviews:

No comments