fatboy Hotspot Blanket, Manual

Page: 7 / 11

11 11 - EN
General use:
• Charge the Hotspot by inserting the USB cable
into the adapter and snap the magnetic charger
to the back of the label.
• Connect the adapter to the power supply. It will
take approximately 3 hours to fully charge the
battery. The led indicators will show the battery
status. The battery is charging when the indicator
is blinking. When all four LEDs are lit and no
longer blinking, the battery is fully charged.
• The Hotspot can be controlled by the switch on
the Label.
• Press the button hidden underneath the ‘O’ of the
Fatboy® logo once to turn it on.
• Press the button a second time to switch to the
next heat setting (Medium).
• Press the button a third time to switch to the
maximum heat setting (Hot).
• Press the button one more time to turn it off.
• When you press and hold the button for
2 seconds, the battery indicator will show
the battery status.
• When the Hotspot turns off by itself (after a
blinking battery indicator) it indicates the battery
needs to be charged.
• Charging the Hotspot should always
be done indoors.
Maintenance:
• If you don’t use the Hotspot for a longer period
of time, please make sure you recharge the
battery at least every three months to keep the
battery in good condition.
Cleaning:
NOTE: THE FILLING AND ELECTRONIC
COMPONENTS ARE NOT WASHABLE and
should be kept dry.
• The Hotspot Lungo cover can be
hand washed. Please remove the cover
before washing, and take the inner bag and
electronic components out.
• The Hotspot Quadro cover can be hand washed.
Please remove the cover before washing,
and take the inner bag and electronic
components out.
• The Hotspot Blanket can be hand washed.
Please remove the Fatboy label and battery before
washing.
• Do not use cleaning agents which contain alcohol,
benzene, abrasive substances or chemicals.
Trouble shooting:
The Hotspot is not working well:
The product is not responding at all when pressing
the on/off switch:
• Try to charge the pillow/blanket using the adapter
and USB cable provided with Hotspot.
• When you attach it to the charger, the indicator
lights on the Fatboy® label should light
up(blinking) indicating the charging process
has started.
EN
Fatboy® product information Hotspot:
Hotspot is a battery powered heating product
using infrared (FIR) technology. Hotspot can easily
be turned on by pressing the switch on the Fatboy
label, it has three heat settings indicated by the
LEDs on the label.
Step 1: 28-32 Degrees Celsius
Step 2: 34-38 Degrees Celsius
Step 3: 38-42 Degrees Celsius
There is also a battery indicator on the label
showing the remaining battery capacity
indicated by 4 LEDs.
4: 100-75%
3: 75-50%
2: 50-25%
1:
25-0%
The Hotspot can easily be charged using the USB
charger included. On the back of the Fatboy label
there is a charging port. Just snap the magnetic
charging cable to the back of the label, insert
the adapter into a suitable power supply and the
charging will start, this will take up to 3 hours.
In the meantime, the LEDs will indicate the
battery status.
WARNING: READ CAREFULLY BEFORE USE!
• Please use the 5V 2.4A adapter included
to charge your Hotspot.
• Only use the USB cable supplied to charge
your Hotspot.
• Keep your Hotspot dry.
• Do not expose your Hotspot to excessive heat
from external heat sources.
• This is not a toy, please keep away from children.
Instructions for use and maintenance
First time use:
• After unpacking, please connect the battery to
the control panel inside the Fatboy® label. There is
a Barrel plug inside the cover to which the battery
can be connected.
•
Hotspot Lungo: The battery itself can be stored
in the front pocket of the pillow. After the battery
has been stored, please put on the pillow cover
and close the zipper.
•
Hotspot Quadro: The battery itself can be stored
in the front pocket of the pillow. After the battery
has been stored, please put on the pillow cover
and close the zipper.
•
Hotspot Blanket: The battery can be stored in
the pocket behind the Fatboy® label, which is
attached with Velcro and can easily be removed to
store and connect the battery.