СРС308 Processor Module
CPC308 Module Installation
C P C 3 0 8 U s e r M a n u a l
© 2 0 1 3 F a s t w e l V e r . 0 0 1 b E
49
4
CPC308 Module Installation
It is necessary to strictly follow the rules, warnings and procedures cited below in order to install
the module correctly, avoid damage to the product, the system components, as well as personal
injuries.
The procedure of installing drivers of all the peripheral devices installed on the module is cited in
the descriptions supplied with those drivers. This Manual also does not describe the procedure of
operating systems installation. Please refer to the documents supplied with the operating system.
4.1
Safety Requirements
Strictly follow the safety requirements below when handling the CPC308. The Manufacturer,
Fastwel Group Co. Ltd incurs no liability for any damage resulting from non-compliance with these
requirements.
Careful!
Be careful when you handle the module, because the heatsink can
become very hot. Don't touch the heatsink when you install or
dismantle the module.
Besides, the module should not be put on any surface or placed in
any package until both the module and the heatsink are cooled
down to the room temperature.
Attention!
Always power the system off before connecting or disconnecting the
module power cable. Violations of this rule may jeopardize your
health and life, as well as inflict damage to the system or the
module.
Electrostatic Sensitive Device (ESD)!
The module contains elements that are sensitive to the impact of
electrostatic charges. To avoid damage to the module, observe the
following safety precautions:
Remove electrostatic charges from your clothes before
you touch the module; remove the charges from tools
before you use them as well.
Do not touch electronic components and connector
contacts.
Disconnect power cable before installing/dismantling
PC/104-Plus expansion module.
If you work at a professional workplace with antistatic protection, do
not neglect the opportunity to use it.
