Fastrax EDCH-144E/C, Installation And Operating Manual

Page: 38 / 60

38
3.3 How to control On-Screen Menu Utility
Action Function
MenU Call.the.On-screen.menu.utility
Joystick left.or.right
Go.into.the.sub-menu.items.
Execute.the.command.(exit)
Change.value.
Navigate.through.the.menu.items.
Joystick
up.or.down Navigate.through.the.menu.items.
Joystick
down Finish.editing.title.
Zoom
handle.twist
Change.value.
Enter.editing.title.mode.
CTRL + Joystick Change.value.of.angle.
eSC Escape.(EXIT)
AUTO.SCAN.SETUP
SCAN.0. :.AUTOSCAN0
SPEED(MODE). :.FAST.VECTOR
START.ANGLE. :.7.,.07.7
END.ANGLE. :.57.7,.080.7
SCAN.DIR.. :.CCW
SWAP. :.OFF
SAVE.AND.EXIT.(ESC.TO.CANCEL)
HOLD.DOWN.CTRL.KEY
WHILE.SELECT.POSITION.
3.4 Auto Scan
(First.Item.of.the.Main.menu./.Shortcut:.
SCAn
)
The.Auto.scan.supports.up.to.4.programmed.angles.at.user-programmable.speeds..Follow.these.steps.to.program.Auto.Scan:
.. Press.the.
SCAn
key.to.enter.Auto.Scan.menu.directly..Or.press.the.
MenU
key.to.display.the.main.menu.on.the.monitor..Scroll.to.Auto.Scan.and.push.the..
. Joystick to.the.right.
.. Select.an.Auto.Scan.number.by.pushing.the.
Joystick
left.or.right.
3.. Twist.the. Joystick to.enter.the.title.by.scrolling.through.the.alphanumeric.characters.and.pushing.the.handle.to.the.right.or.left.to.move.to.the.next.space...
. .Press.
enTR
key.or.push.the.
Joystick
down.to.finish.title.mode.
4.. When.finish.entering.the.title,.select.„START.ANGLE”.with.the. Joystick ..Hold.down.the. CTRL/PGM .key.while.selecting.the.start.position.using.the..
. Joystick ..Current.panning.position.will.be.displayed..Release. CTRL/PGM key.to.complete.the.selection.of.the.start.position.
5.. .Push.the. Joystick downward.to.select.„END.ANGLE”..Hold.down.the. CTRL/PGM .key.while.moving.the. Joystick to.select.the.end.position..The.end.
position.angle.should.be.larger.than.start.position..Release.the. CTRL/PGM .key.to.complete.the.selection.of.the.end.position.
6.. Push.the.
Joystick
downward.to.select.„Speed”.and.set.the.speed.by.twisting.the.
Joystick
clockwise.or.counterclockwise.
7.. Select.Save.and.Exit.by.pushing.the. Joystick to.the.right..Press. eSC to.exit.the.program.without.saving.
nOTe: Using the Tour mode in conjunction with preset and Auto Scan, you can make the camera travel from one preset position to another preset
position at a specific speed. (Pan only)
SPeeD (MODe) . NORMAL~NOMAL9,.SLOW.VECTOR,.FAST.VECTOR
. . NORMAL.(slower).<––>.NORMAL9.(faster)
. . The.zoom.is.fixed.at.wider.angle.and.the.zoom.magnification.information.is.not.displayed.
. . In.the.vector.mode,.the.dome.moves.from.start.point.to.end.point.including.tilt.linearly...
. .