33
2. Installation and Configuration
2.1 Package Contents
AIO.(All.In.One).is.design.to.a.compact,.small.size,.hard.Dome.Camera.Housing.
The.housing.is.constructed.of.aluminum,.steel.and.plastic..The.housing.is.designed.to.be.mounted.both.wall.and.ceiling.type.
The.housing.meets.the.Protection.Classification.IP66.standards.for.dust.and.moisture.resistance.
This.housing.has.one.fan.and.one.heater.controlled.thermostatically.
The.thermostat.of.heater.is.set.to.turn.it.on.5˚C.(±5).and.to.turn.it.off.5˚C.(±5).
The.sunshield.is.available.for.application.to.avoid.the.direct.rays.of.the.sun.
x.Dome.Camera.housing
x.Instruction.Manual.(this.Document)
x.Torx.Wrench....
2.2 Installation
You.need.one.optional.mount.kit.of.the.wall.mount.and.the.ceiling.mount.to.install..
The.wall.or.ceiling.mount.must.be.attached.to.a.structural.object.such.as.hard.wood,.concrete.that.will.support.the.weight.of.the.mount.and.AIO.
The.use.of.a.solid.backboard.is.recommended.when.attaching.to.gypsum.walls.
.. Remove.the.Protection.pad.and.the.tape.from.attached.the.dome.camera.
.. Attach.the.mounting.base.to.wall.using.the.supplied.M8.tapping.screw.and.plastic.bushing..(Ceiling.using.the.supplied.M6.tapping.screw.and.bushing)
3.. Wind.the.both.thread.of.the.pipe.end.with.Teflon.tape.about.0times.for.sealing.
.
Then.use.a.silicone.rubber.sealant.to.seal.the.area.where.the.wall.(ceiling).mount.and.the.pipe.meet.
4.. Place.a.bead.of.silicone.sealant.around.the.wall.and.ceiling.mount.mounting.flange,.press.it.to.the.surface.and.line.up.the.flange.hole.with.drilled.holes.
5.. Refer.to.Chapter.7.and.8.
CAUTIOn: A silicone rubber sealant must be applied to seal the housing to secure waterproofing.
2.3 Basic Configuration of Dome Camera System
Basic.Installation.Diagram
.AWG.UTP.CABLE
J-Box.(Front)
Summary of Contents for EDCH-144E/C
Page 59: ...59...
