8.4. Memory Store, Deletion and Reset
All programmed system parameter data can be deleted i.e. can
be reset to the standard parameters. Equally, all stored messages
can be deleted. In this case the programmed timer status,
navigation log status and NAVTEX parameters will also be
deleted. It is therefore recommended, that you print out the
system and NAVTEX status, before you commence this function
(see chapters 8.3. and 5.7.)
To activate the deletion function:
1.
Switch off the unit - <OFF>
2.
Hold key <NO> and
3.
Switch on - <ON>
4.
Release key <NO>
The display will show:
Clear whole
memory ?
YES / NO
5. answer by pressing <YES> or <NO>
6. Switch the unit off for a few seconds and switch on again.
All data and news programmable, are deleted and can now be
newly programmed.
