4.2. Interrupting and Restarting the Timer
An actual timer programme can be interrupted by pressing the
<STDBY> key. The unit will switch back automatically to the standby
mode at the respective stop time. It is possible to restart the unit
during operation by switching it off for approx. 3 to 5 seconds.
When switched on the unit returns to its programmed status.
4.3 Reading Stored Messages
Stored messages can be read on the display as often as desired.
The complete data record store disposes of more than 20000
characters. Of this amount approx. 5500 are reserved for NAVTEX
messages, the rest for Morse, RTTY and SITOR together. When the
storage space is full, the oldest message will be automatically
deleted. However this is done separately for NAVTEX and other
messages. Meaning that the oldest NAVTEX message cannot be
replaced by a new RTTY message, only by a new NAVTEX message
and vice versa. Each message is identified by date and time in the
following form: TT.MM.HH.MM (day, month, hour, minutes).
Press
key to recall READ MEMORY
use keys and
to select the type of
message to be read (NAVTEX or CHANNEL) and press <ENTER>.
press key
once
more
