Keys <UP> and <DOWN> have an auto-repeat function, which
means the selected value will increase or decrease in steps as
long as the key is depressed. As long as you have not pressed
<ENTER> you can change the value as often as required.
Having checked that all values are correct press <ENTER>. By
pressing <ENTER> once more you can enter further programme
rows.
4.1.2.
Deleting Timer ON/OFF Times
Call up TIMER menu as in 4.1.
Press
key
On display will appear:
DELETE ROW NO. : 1__
Use the cursors <UP> and <DOWN> to select the number of the
row to be deleted and activate by pressing <ENTER>. To leave
the TIMER mode without a row deletion, press <EXIT>.
Press <EXIT> once more to return to the standby mode
The maximum length of time in the timer function is 60 minutes.
However it is possible to put in the same start time as the previous
stop time. In the case where to programmed times overlap, the
newer start time is dominant
Should a timer function be interrupted my manual operation e.g.
calling up another frequency, the unit will still return to standby
mode on reaching the stop time
