8.2. Setting of Owner's and Vessel's Names
The name of the owner and of the ship can be entered into the
FMD15. They will then appear on the bottom line at the end of
each print out.
•
use the cursor <DOWN> to spring to position 6 – VESSEL
•
press <ENTER> to call up menu position 1 OWNER.
The display will show:
ABCDEFGHIJKLMN
NPQRSTUVWXYZ -_
OWNER´s NAME
Using the cursors <YES> and <NO> you can select the letters A to
Z, (-) hyphens and (_)spaces. The selected letter is allotted by
pressing <DOWN>. The letter can be deleted again by pressing
<UP>. When the owner's name has been correctly selected, press
<ENTER> to store.
The same procedure should be used for storing the vessel's
name.
•
Use cursor <DOWN> to spring to menu position <2> SHIP
•
Press <ENTER> to call up above display.
