background image

Chapter 1  Introduction 

The FastLinc 810E Industrial Wireless Ethernet Modem is specially designed for 
Point-to-Point and Point-to-Multipoint wireless applications, offering system-wide 
connections between PLC’s at a speed of up to 11Mbps over the air data rate.  Fully 
compliant with IEEE802.11b standard, the FastLinc 810E Modem provides powerful features 
such as the Windows-based configuration utility, MAC address filtering, WEP security and 
more.

 

1-1 Features and Benefits 

 

Creates a Point-to-Point connection linking two LANs, using 2 FastLinc 810E Modems. 

 

Creates a Point-to-Multipoint system using three or more FastLinc 810E Modems. 

 

External antenna allows for the use high gain antennas. 

 

With an over the air data rate of 11Mbps and 5.5Mbps, the system is faster than an E1/T1 
data link. 

 

Fully IEEE 802.11b compatible.     

 

Transmits in the unlicensed 2.4Ghz ISM band. 

 

Seamless roaming within the 802.11 & 802.11b wireless LAN infrastructure. 

 

Provides user authentication to enforce tight security. 

 

MAC address control for enhanced security 

 

Easy to install and configure. 

 

Provides Window-based configuration utility. 

 

Industrial rugged-ized enclosure provides protection in harsh environments. 

 

 

 

 

 

-1-

Summary of Contents for 810E





















Reviews: