Fast BW500, Operation And Maintenance Manual

Page: 79 / 112

Long Term Shutdown
Page 73
TANK SYSTEMS
as normal until clean liquid comes out of
sprayer tips.
5. Turn boom OFF, stop the product pump
and stop the tractor.
6. Turn the manual 3 way ball valve
identified as “Valve
E” (located under platform on left side of
sprayer) to “Product Tank” (Point handle
toward rear of sprayer).
7. Turn ON the “Agitation Valve” located
on the front control stand - If so desired.
8. Turn ON the Self Cleaning Filter valve
located at the front left corner of the
operator platform.
Long Term Shutdown
Rinsing the Product Pump, Product Tank,
Controls and Boom Lines:
NOTE: It is important to “Triple” rinse the
system to insure proper cleaning. The use
of a Neutralizer is recommended for
cleaning when changing chemicals.
Products are available from your FAST
dealer.
1. Add the recommended amount of
Neutralizer to the clean water rinse tank.
2. Turn the manual 3 way ball valve
identified as “Valve E” (located under
platform on left side of sprayer) to “Rinse
Tank” (Point handle forward).
3. Start the product pump and run at full
speed.
4. Open “Valve B” located in the front of
the sprayer on the control stand. Let the
pump run until you have used a third of the
water in the clean water rinse tank.
5. Close “Valve B” located in the front of
the sprayer on the control stand.
6. Turn the manual 3 way ball valve
identified as “Valve E” (located under
platform on left side of sprayer) to “Product
Tank” (Point handle toward rear of
sprayer).
7. Drive at normal speed, turn complete
boom on and spray as normal until product
tank is empty.
8. Repeat the cleaning procedure two
more times to ensure proper cleaning.