Fast BW500, Operation And Maintenance Manual

Page: 76 / 112

Electric Control System
Page 70
TANK SYSTEMS
7. Stop the product pump.
8. Return the 3 way ball valve to the
desired position (“Rinse Tank” or “Product
Tank”).
9. Close the “Fast Fill” valve.
10. Shut off the external water source.
11. Disconnect the fill hose and replace
the dust cap. Be careful removing the fill
hose from the connector - there could be
some liquid in the line.
1 - Valve A
Electric Control System
Filling The Rinse Tank
The 50 gallon rinse tank can be filled 3 dif-
ferent ways:
Fill Through Top Lid
1. Remove the lid from the top of the rinse
tank. Fill the tank using a garden hose or
similar means.
2. Replace the lid when complete.
Filling With Transfer Pump
Your sprayer is equipped with a 2” male
fast fill connector and a ON/OFF valve
(identified as “Valve F”) located on the left
side of the sprayer, directly behind the
step.
Fill as follows:
1. Connect the fill hose to the 2”
connector.
2. Charge the fill hose with water using the
transfer pump.
3. Locate the electric control switch on the
control box on the tractor. Move the switch
1