Fast 9500, Owner'S Manual

Page: 74 / 116

TRANSPORTING
TRANSPORTING Boom Sprayer 9500 / 9600 Page 74
Unfolding/Folding the Booms
A. Left Wing Tilt Switch
B. Main Wing Height Switch
C. Right Wing Tilt Switch
D. Main Wing Fold Switch
E. Flip Wings Fold Switch
F. Model specific
Figure 26: Transport Lock
Figure 27: Transport Pin
CAUTION: Be sure all bystanders are
clear of the Sprayer.
WARNING: Prevent serious injury or
death. The machine coming near or
contacting power lines can cause
electrocution. Electrocution can
occur without contact. Fully lower
wings before moving or transporting.
1. Place all controls in neutral, stop the
engine, set the parking brake, and
remove the ignition key before
proceeding.
2. Retract the transport lock pins from
their cradles.
3. Open the valve to the boom lift
cylinder(s) that allows the boom to
lower. Note that the valve might be
located on the hydraulic block for
some models.
Figure 28: Boom cylinder valve common to 60' - 100'
boom widths.
4. Start the tractor and run at 1/3-throttle
to provide hydraulic fluid to the boom
position cylinders.
5. See Boom Function Control Box for
per-switch functions.
6. Raise the booms above their cradles.