Fast 9500, Owner'S Manual

Page: 22 / 116

INTRODUCTION
INTRODUCTION Boom Sprayer 9500 / 9600 Page 22
Fence Row Nozzles
Fence Row Nozzles are equipped to provide
coverage next to a fence or at the edge of a
field. Open the inline valve when spraying
next to a fence and turn it off when in the
field.
Figure 2: Standard manual fence row nozzle
Figure 3: Electric shutoff fence row nozzle
Boom Auto-Leveling
A Norac Auto Leveling System (optional) is
mounted on the back of the frame. It is
integrated into the hydraulic system to keep
the booms level.
Figure 4: Norac Auto Leveling Valve
Speed Sensors
Sprayers that are equipped with an
automatic controller must have a way to
measure ground speed. A magnetic sensor is
mounted on the right-hand wheel. Be sure
the magnet clearance is set and maintained.
The ground speed proximity magnetic
sensor system is located on the right wheel.
It consists of a magnetic sensor and
associated wiring. To generate the required
signal, the magnet must be set and
maintained at the proper distance from the
pegs.
Set the magnet at 1/8 inch (3 mm) or the
thickness of an American nickel from the
pegs. Use the adjusting nuts and threads on
sensor to set the gap. Be sure to tighten
fasteners carefully so as not to strip the
threads on plastic sensor.
Figure 5: Sensor mounting