FMT3006
Instruction Manual
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: [email protected]
W: www.fastmovertoolsuk.com
Specification
Features and Benefits
Fluid Tip
1.3, 1.4 or 1.8
- Reduced air consumption means less strain on
Max Working Pressure (Gun) 22PSI
compressor.
Max Working Pressure (Tip) 9.6PSI
- A high transfer efficiency or 68%+/- reduces
Air Consumption
4.3CFM
paint use.
Air Inlet
1/4” NPS
- Stainless steel fluid nozzle and needle allow
Cup Size
600ml
for use of waterbased coatings.
Weight
649g
- Significant reduction in operating costs.
General Safety Instructions
1
Users must choose the correct spraygun, with suitable setup and paint flow, for the job
requirement.
2
Before connecting the spraygun, check the air pressure available is suitable.
3
Follow all HSE guidelines regarding sprayguns and their use as well as your own
Health & Safety Policy.
4
Switch off air source before refilling, cleaning or servicing the spraygun.
5
Never leave your spraygun exposed to dust, silicone, acids vapors, explosive or
flammable gases, rain, sun, fog or snow.
6
Ensure the air line cannot be twisted, pinched or damaged.
7
NEVER carry tool by the air hose.
8
Never expose air hose to heat, oil, water or sharp edges.
11
DO NOT allow children to use or play with this tool or enter the work area.
12
DO NOT store this tool in a place that is within reach or accessible to children or
unauthorised persons.
13
Store this tool in a dry and secure location.
14
DO NOT open or tamper with any part of this tool. Cleaning and servicing of the
spraygun is permitted but repairs can and must only be carried out by an authorised
service centre.
IMPORTANT
Please read through this Manual carefully before using the FMT3006.
This tool must only be used for spraying and within the parameters
outlined in this manual. All users of the equipment should be trained in
any risks associated with the products they are spraying or using as
spraying and finishing aids.
Wise Precaution
This product is free from
contaminants.
However, we do
recommend that you flush
your gun through with a
suitable thinner before use
as a preventative
precaution.
Fluid Nozzle
600ml Cup
Trigger
Air Regulator
1/4” Air Inlet
Fluid Volume Adjuster
Hook
Cup Lid
Fan Adjuster
FMT3006_Product Instructions 18/06/2013 11:02 Page 2
