FAST_EnergyCam_Manual
.docx
| v1.30 | 8. December 2016
page
33
/ 38
Mode:
T2 / S2 -> Switching the wM-Bus Mode requires a Firmware update
Log reading to XML:
ECCollectorWin logs the received meter data to
<selected Folder>\EC<Meter#>.XML
You can manually add a meter with Menu
AddMeter or by pressing the “AddMeter” button.
Manufactor:
is always 0x18C4 (FFD)
Ident Number:
the ID of the sensor (you can see the ident number of the EnergyCam sensor in the
Eventlog of ECWin – see page 19 : Get wM-Bus IdentNumber -> 20981888)
Alias:
alias name of the meter used in this software
Version:
is always 01
Type:
Sensor Type (Oil / Electricity / Gas / Water / Counter)
Decryption:
decrypt incoming messages of that meter with the defined key
Key
:
the key must be 32 digits long
The UI shows the details of the collector and the installed meters. Meters can be edited and
removed with a right mouse click on the meter details.