FAST_EnergyCam_Manual
.docx
| v1.30 | 8. December 2016
page
22
/ 38
Encryption
:
encrypt data packets with defined key
Key
:
The Encryption key consists of 32 hexadecimal characters (128 bits). This user
defined key must be identical to the one you use on your gateway. The example
key above should not be used for security reasons.
Mode:
T2 / S2 -> switching the wM-Bus Mode requires a Firmware update
Changes on some of these settings require an installation cycle of the EnergyCam device to be
effective. These Settings are marked with a green dot in the dialog box.
OCR Configuration:
Reading:
read decimal point
Meter:
enable decrement of reading (for meters which are able to run backwards)
Reading Timer:
repeat reading every 60min / 30min / 15min / 10min / 5min / 2min / 1min
Font:
White on Black – white digits on black
background (default font)
Black on White – black digits on white
background (mainly water meter)