www.fassride.com
(866) 769.3747
STEP 4:
INSTALL FUEL LINE
Caution: DO NOT use sealant on AN fittings
E
.
Insert PL-1005 into remaining fuel line using oil. Attach fuel line to the ‘E’ port of the FASS system.
Torque to 18 ft./lbs. Route this line to the engine side of the factory
feed line on top of the fuel tank
,
connect to OEM fuel line with PLB-1212
.
TO SENDING UNIT
FUEL RETURN
LINE FROM THE
ENGINE
F.
Drain the OEM water separator housing of fuel.
G.
Bypass factory fuel filter housing with 10-305/QC-4600 assembly. Be sure to install thread tape
onto both QC-4600's.
